Oce cm4520 User Manual page 457

Replacing Toner Cartridges and Staples and Emptying Waste Containers
9
Display while a job is being performed
!
Detail
When performed by user
If the hole-punch waste container has become full while a job is being
performed, the job being performed is paused. To continue the job with-
out canceling the Punch setting, empty the hole-punch waste container.
To cancel the Punch setting and continue the job, touch [Cancel Punch].
When performed by technical representative
If the hole-punch waste container has become full while a job is being
performed, the job being performed is paused. To continue the job, touch
[Cancel Punch]. However, the continued job is printed without holes be-
ing punched.
Display in Enlarge Display Mode
9-30 cm4520