Replacing Toner Cartridges and Staples and Emptying Waste Containers
9.4
Emptying the Waste Containers
If the hole-punch waste container in punch kit installed on finisher 9238 be-
comes full, the message shown below appears (if it can be emptied by the
user).
Note
The setting for emptying the hole-punch waste container should be spec-
ified by the technical representative. For details, contact the technical
representative.
The default setting is "Service". If a message appears, immediately con-
tact the technical representative.
Display for the Punch Dust Box setting
cm4520
9
9-29