Basic Copy Operations
–
Touch [Auto] to automatically determine the position of the
punched holes according to the orientation of the loaded docu-
ment. If the document length is 11-11/16 in. or less, the holes are
punched along the long side of the paper. If the document length is
more than 11-11/16 in., the holes are punched along the short side
of the paper.
–
If "Auto" is selected, the punched hole position is set at the top or
at the left.
–
To cancel changes to the punched hole position, touch [Cancel].
4
Touch [OK], and then touch [OK] in the next screen that appears.
The Basic screen appears again.
cm4520
3
3-81