To Place The Document On The Original Glass - Oce cm4520 User Manual

3

To place the document on the original glass

0 For details on the types of documents that can be placed on the original
glass, refer to "Original Documents" on page 7-26.
0 When placing the document on the original glass, be sure to lift open the
ADF at least 20°.
If the document is placed on the original glass without the ADF being lift-
ed at least 20°, the correct document size will not be detected.
0 Do not place objects weighing more than 4-1/2 lb on the original glass. In
addition, do not press down extremely hard on a book spread placed on
the original glass, otherwise the original glass may be damaged.
0 For thick books or large objects, make the copy without closing the ADF.
When a document is being scanned with the ADF open, do not look di-
rectly at the light that may shine through the original glass. Although the
light that shines through the original glass is bright, it is not a laser beam
and, therefore, is not as dangerous.
1
Lift open the ADF.
2
Position the document face down onto the original glass.
– Load the document pages so that the top of the document is to-
ward the back or the left side of the machine.
When loaded in the
v orientation:
3-10
Basic Copy Operations
When loaded in the
w orientation:
cm4520