Oce cm4520 User Manual page 149

3
9
Press the [Start] key.
Scanning begins.
10
Load the next batch of the document, and then press the [Start] key.
– Repeat this step until all pages of the document have been
scanned.
– The amount of memory available can be checked beside "Memory"
in the upper-right corner of the Basic screen.
– To delete the image data, press the [Stop] key, and then delete the
job. For details, refer to "Stopping Scanning/Printing" on
page 3-86.
– To change the scanning settings, touch [Change Setting]. For de-
tails on changing the scanning settings, refer to "To change scan
settings for each document" on page 3-31.
– The buttons that appear in the Change Setting screen differ de-
pending on the specified settings. Settings for the following can be
changed.
Simplex/Duplex, Bind, Zoom, Frame Erase, Center Erase, Original
Size
3-18
Basic Copy Operations
cm4520