Automatic Paper-Drawer-Switching Feature; Order For Selecting The Paper Drawers - Oce cm4520 User Manual

Mfps & printers

Hide thumbs Also See for cm4520:

Table of Contents

Automatic Paper-Drawer-Switching Feature

If the selected paper drawer runs out of paper while a job is being printed and

a different paper drawer is loaded with paper meeting the following condi-

tions, the other paper drawer is automatically selected so printing can con-

tinue. If the optional large-capacity paper feed cabinet is installed, a

maximum of 3,400 copies (with 8-1/2 × 11 v paper) can be made continu-

ously. (The paper drawer is automatically switched only if the "ATS Permis-

sion" parameter in the Utility mode is set to "Permit".)

Operating Conditions

- The paper is the same size.

- The paper is positioned in the same orientation.

- The paper is the same type.

- Paper drawers that are selected when the paper drawer is automatically

For details on the specifying the paper drawers that are selected when

the paper drawer is automatically switched, refer to "System Setting" on

As a factory default, when a different paper drawer is automatically selected,

the next paper drawer in the following list is chosen.

2nd drawer → 3rd drawer → 4th drawer → 1st drawer

To change the order in which the paper drawers are selected, refer to

"System Setting" on page 12-17.

Copy Paper/Original Documents