System Setup; Position The Unit; Selecting Video Format - Optiview H.264 DVR System User Manual

DVR User's Manual
Supports Pre-Alarm Recording
Motion Detection Marker
Remote software for remote monitoring
Central Management System (CMS) for large-scale video management
Human Technology:
ezBurn™ for quick video export
ezRecord™ for quick recording setting
ezDDNS™ for automatic DDNS configuration
GUI interface
IR Remote Control (Optional)
Compact Control Keyboard (Optional)
2.

System Setup

The notices and introduction on system installation will be described
particularly in this chapter. Please follow the description to operate the unit.
In order to prevent the unit from data loss and system damage that caused by
a sudden power fluctuation, use of an Uninterruptible Power Supply (UPS) is
highly recommended
2.1

Position the Unit

First, note to position / mount the DVR in a proper place and be sure to power
off the unit before making any connections. The placed location should avoid
hindering or blocking the unit from airflow. Enough airflow is needed to
protect the unit from overheating. The maximum allowable temperature of
operating environment is 40°C.
The unit utilizes heat-conducting techniques to transfer internal heat to the
case, especially to the bottom side of the unit.
NOTE: Be sure the rubber feet are not removed, and always leave a
space for air ventilation on the unit's bottom side.
2.2

Selecting Video Format

The DVR is designed to operate under either NTSC or
PAL video formats. The switch is on the rear panel.
8