Table of Contents
Advertisement
DVR User's Manual
The default passwords are shown in the following table. The same
passwords are used for entering the remote viewing software.
Administrator Password
passwords to prevent unauthorized access to the unit.
3.4
System Date / Time Setting
Users can set the current date, time and other OSD parameters in Date/Time
menu (under System Setup Menu). The administrator's privileges are
required for entering the submenu. In OSD setup menu, select <System
Setup> and press ENTER, then select <Date/Time> to access the Date/Time
menu; the menu displays as follows.
1. Date
2. Time
3. Date/Time Display
4. Date Display Mode
5. Time Display Mode
6. Date/Time Order
7. Daylight Saving Time Setup
3.4.1
Set Date / Time
Set Date / Time
Select <Date> / <Time> and press ENTER to adjust the settings. LEFT /
RIGHT keys are used to move the cursor to previous or next field, ENTER is
to select, and UP / DOWN are used to change the value in the selected field.
record new video. The date and time of previously recorded video
will not be changed.
case, it is strongly recommended to format the HDDs to avoid
database corruption.
Date / Time Display
Users are allowed to set the time OSD displays in 1 or 2 rows. Use the UP /
DOWN keys to change the setting.
16
User Password
1 2 3 4
NOTE: It is strongly suggested to change the
Date/Time
NOTE: The new date / time setting applies to
NOTE: If time settings have to be changed in any
4 3 2 1
2008/02/21
PM10:39:26
1 Row
Y/M/D
12 HR
Date First
Advertisement
Table of Contents
