Preset Record Configuration; To Record Event Video Only; Per Camera Configuration - Optiview H.264 DVR System User Manual

DVR User's Manual
3.6.2

Preset Record Configuration

The <Preset Config> is used to select the preset recording quality and frame
rate. In normal circumstances, it is strongly recommended to set the preset
configuration as <Best Quality>. Below table shows the PPS and picture size
under <Best Quality> in Half-D1 mode. Please refer to OSD Menu Setup
Guide, Section Preset Record Configuration for more detailed information.
Halfl-D1 mode (NTSC: 720x240@60PPS; PAL: 720x288@50PPS)
Normal PPS
3.75 NTSC
(3.125 PAL)
3.6.3

To Record Event Video Only

If the DVR shall start recording only when alarms are triggered, follow the
steps below:
Enter the OSD setup menu with correct password.
In the OSD setup menu, select <Record Setup> menu. Move the cursor to
the item <Preset Config>, and select <Event only>.
Refer to OSD Menu Setup Guide, Section Preset Record Configuration for
more detailed information.
3.6.4

Per Camera Configuration

This function is used to set the Day / Night / Weekend PPS (Picture per
Second) and Quality for each channel. The Preset Configuration must be set
to <OFF> for accessing these schedules. The menu is displayed as below
(Record Mode: 720×240@60PPS in NTSC / 720×288@50PPS in PAL).
Cameral Select
Normal PPS
Normal Size
Event Max PPS
Event Size
Event Active
22
Normal Size Event PPS
15 NTSC
10 KB / Pic
(12.5 PAL)
Per Camera Config
Day Night
15 15
Mid Mid
30 30
Best Best
Both Both
Event Size
10 KB / Pic
CH1
Weekend
15
Mid
30
Best
Both