Operating Cameras With Dome Control - Optiview H.264 DVR System User Manual

DVR User's Manual
5.3.1.2

Operating Cameras with Dome Control

The remote monitoring software allows users to control and
configure a dome camera remotely.
Click on any CAMERA button displayed with a dome icon to
view the camera in full screen. The Dome Control Panel will
be displayed on the main window. The items on the dome
control panel are described as follows.
Set Preset
Set Preset is used to set up preset positions. The remote monitoring software
allows its user to set up to 255 preset positions with American Dynamics,
Fastrax, JVC, Panasonic (C & N), and Pelco (Pelco P & Pelco D) domes.
Use Direction buttons to move dome camera to an appropriate position, and
then click the button and choose wanted number from the pull-down list. The
preset position is named as the selected number.
Go Preset (•)
Go Preset is used to call the camera preset point, which was set up with the
set preset point function. Click and choose a number to call the preset point
for viewing.
Auto Focus (A.F.)
Click on it and the focus of the camera will be automatically adjusted to show
a clearer image.
Dome ID (ID).
Click for changing the dome ID and protocol.
User's privilege is not allowed to change the
dome ID and protocol; Admin privilege is
required to access this function.
Focus +/−
Use to adjust the camera lens to focus on objects for a clear view. Click on
<Focus +> to focus near or <Focus −> to focus far.
Iris +/−
49