Function Keys - Optiview H.264 DVR System User Manual

DVR User's Manual
3.1.2

Function Keys

This section describes the functional keys, which are for normal operation, on
the front panel of the DVR.
Please refer to the Setup Guide for the graphical illustration of functional
keys.
CHANNEL
In both Live and Playback modes, press the CHANNEL key to view the
corresponding video in full screen. The number of the CHANNEL keys
corresponds to the number of cameras supported by the unit.
In dome control mode, the key "1" is used to access the Set/Go preset
menu; the key "2" is used to hide or display the dome setting parameters.
Direction Keys
In Zoom mode, these keys function as Direction keys.
In the OSD setup menu, the LEFT/ RIGHT keys are used to move the
cursor to previous or next fields. To change the value in the selected field,
press UP/ DOWN.
ENTER / ZOOM
In OSD setup menu or selection interface, press this key to make the
selection or save settings.
In live full screen view mode, press this key to view a 2× zoom image;
press it again to exit Zoom mode.
COPY
In Playback mode, press COPY to select the start and end time of the export
video. Refer to Section Video Export for detailed information.
CALL
In Live mode, press this button to enter call monitor control mode.
In Dome mode, press CALL in association with ENTER to enter the OSD
setup menu of the dome camera. (See Dome Control section for more
information)
12