Accurate Playback By Time; Mark Playback - Optiview VRHT Quick Start Up Manual

Click the , you can go to the smart search playback. Click it again, system stops smart search
playback.
Important
z
System does not support motion detect zone setup during the full-screen mode.
z
During the multiple-channel playback, system stops playback of rest channels if you
implement one-channel smart search.

2.4.2 Accurate playback by time

Select records from one day, click the list, you can go to the file list interface. You can input
time at the top right corner to search records by time. For example, click time 06:00.00 and
then click Search button, you can view all the record files after 06:00.00 (The records includes
current time.). Click Play button, you can see system begins play from 06:00.00. See Figure 2-
14.
Note
z
After you searched files, system implement accurate playback once you click Play for the
first time.
z
System does not support accurate playback for picture.
z
System supports synchronization playback and non-synchronous playback. The
synchronization playback supports all channels and non-synchronous playback only
supports accurately playback of current select channel.

2.4.3 Mark Playback

Please make sure your purchased device support this function. You can use this function
only if you can see the mark playback icon on the Search interface (Figure 2-12).
When you are playback record, you can mark the record when there is important information. After
playback, you can use time or the mark key words to search corresponding record and then play. It is
very easy for you to get the important video information.
z
Add Mark
When system is playback, click Mark button
2-15.
Figure 2-14
, you can go to the following interface. See Figure
17