Table of Contents
Advertisement
ENTER/EXIT PROGRAMMING MODE
DISPLAY AND KEYBOARD FEATURES
Two keyboard models are available, the 4-key model and the 16-key model. The following
section contains configuration parameters that are common and applicable to both keypad
models, unless specifically labeled as "4-key models only" or "16-key models only".
For more items for the 16-key model, see
on page 235
Display Operating Mode
Select the operating mode of the display. Options are:
•
•
•
$CDIMD00
Local echo mode
$CDIMD02
Display Off Timeout
Sets the timeout for display, backlight and keyboard.
$CDIOT00
Set Display Off Timeout
$CDIOT
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
224
POWERSCAN™ PD/PM96XX
.
Normal Mode: Display not cleared, no echo of the code on Display.
Local Echo: Display cleared after decode, echo of the code on display.
Clear display after decode: Display is cleared after decode, no echo.
08 = 8 second delay
DISPLAY AND KEYBOARD FEATURES
Additional Features for 16-key Models, starting
Normal Mode = Display not cleared
$CDIMD01
Clear display after decode
Display Off Timeout = Disabled
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by two digits (01-99 sec.) from the
Alphanumeric characters in
resenting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
CANCEL
Appendix D, Keypad
rep-
Advertisement
Table of Contents
