Direct Station Selection - ESI IVX C-Class User Manual

ESI Feature Phone operation

Direct station selection

Programming some of the programmable feature keys (see pp. C.2) as station keys will provide direct
access to those stations as well as providing lamp information as to their status. The station keys'
LEDs indicates the status of the station assigned to each key:
If a station key's LED is . . .
Unlit
Red; steadily lit
Red; blinking
Green; steadily lit
Green; blinking
Amber; steadily lit
To call another station programmed into one of your station keys:
1. Press an available (unlit) station key.
2. The called station will sound a short ring followed by a double connect tone.
3. The phone system will activate the called station's speakerphone (or the station will ring if that
station's user has hands-free answer disabled).
4. To disconnect when finished, do one of the following:
(a.) Replace the handset.
or
(b.) (if in hands-free mode) Press the station key again.
or
(c.) Press SPEAKER (if in hands-free mode).
If you press a key for a station that's in use (red; steadily lit), you will "camp onto" the station, where its
Feature Phone's display will tell its user that you're waiting (see "Call waiting," page E.7).
If you press a key for a station that's in DND (amber; steadily lit), you'll be forwarded directly to the
person's mailbox.
E.4
The station assigned to that key is . . .
Available; currently unused
In use
Ringing from another call
Connected to you (including via voice mail)
Ringing from your call
In DND mode
User's Guide