ESI IVX C-Class User Manual page 20

Voice mail operation
Key functions during voice mail message retrieval from an ESI Feature Phone
Key Function name
1 Pause
2 Time and date/
number toggle
3 Reply
4 Back up (rewind)
5 Fast forward
6 Move
7 Delete
9 Save
FLASH/RDL Auto-callback
ESI-DEX Store
# Leave a message
Check other box
Note: When you press 9 once to save the message as old, there is a short delay before the system tells you it
has saved the message. To bypass this delay after pressing 9, just press # to hear the next message.
1
A local call may not be dialed correctly depending on the limitations of the local dialing plan. You may need to dial some of these
calls manually.
D.4
Description
Pauses for one minute or until you press 1 again.
Toggles the bottom line of the display between the
message's time/date and the caller's number.
Replies to the originator of a message (possible only if
message came from another user in the system). Record
your reply at the tone and then press 1 to stop, after which
the system returns you to your mailbox and the message
to which you were replying.
• If pressed during message playback, rewinds 4 seconds
for each key-press.
•
If pressed after the playback has finished, returns to
beginning of message.
Advances playback 4 seconds for each key-press.
(Not available from an analog phone or off-premises location.)
Moves a copy of the message to another user's mailbox.
You may move the copy with or without an introduction.
After the move, the system returns you to your mailbox
and the original message.
Deletes the message from the mailbox (see "Message
Recycle Bin," page D.7).
Saves the message (it will play as an old message the
next time you retrieve messages).
Exits your mailbox without erasing the message, and then
automatically dials the number.
(Not available from an analog phone or off-premises location.)
If Caller ID is present, saves to your Personal Dex for later
use.
(Not available from an analog phone or off-premises location.)
Lets you record a message in another mailbox. At the
prompt, enter the desired mailbox number.
Checks messages in another mailbox (may require a
password, depending on the mailbox's setting.
User's Guide
1