Flow Filter (Ipv6) [Route-Os6] - Hitachi GR2000 Series Configuration Commands

Hitachi gigabit router configuration guide

Hide thumbs Also See for GR2000 Series:

Table of Contents

flow filter (IPv6) [ROUTE-OS6]

Input Format

Setting and changing the global information by each input/output interface.

[set] flow filter <Interface Name> {in | out} [-disable]

Setting and changing the flow information.

Flow cetecting condition

1. When the high order protocol is other than TCP, UDP and IGMPv6.

2. When the high order protocol is TCP.

3. When the high order protocol is UDP.

4. When the high order protocol is ICMPv6.

Note: 1: If the "flow detecting condition" and the operation designation (*1) are set or changed

simultaneously, input the operation designation after the "detecting condition2.

Note: 2: If the parameters in the "flow detecting condition" and the operation designation are to

be changed, input all the setting contents again.

Changing only the operation designation.

Deletion of the information

Indication of the information

Indication of a blank list number in the specified range

GR2K-GA-0014

Filtering/QoS Information