Line Information (Atm); Table 4-6 List Of Initial Values That Can Be Set Using Line Information (Atm Information) And Initial Values During Initial Installation - Hitachi GR2000 Series Configuration Commands

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4.7.6

line Information (ATM)

Input Format
d e f a u l t
Parameters
The initial value items that can be set using line Information (ATM) and the initial
values during initial installation are shown in Table 4-6. For details of each
parameter, refer to the configuration definition information in "line (line Information)
25Mbps ATM/ OC-12c ATM".
Table 4-6
Information
Information Name
Group Name
line Information Selection of clock in OC-3c ATM Line
(ATM)
Physical layer frame format and empty cell
format in OC-3c ATM Line
Transmission interval of ATM PVC Trap in
OC-3c ATM Line
Selection of clock in OC-12c ATM Line
Physical frame format and empty cell format in
OC-12c ATM Line
Transmission interval of ATM PVC Trap in
OC-12c ATM Line
Transmission interval of ATM PVC Trap in 25M
ATM Line
4-40
List of Initial Values That Can Be Set Using Line Information (ATM
Information) and Initial Values During Initial Installation
Initial Value
external (External synchronization)
sdh_idle (Physical layer frame format:
SDH(STM-1, STM-4), empty cell format: ITU-T
specifications)
30 seconds
external (External synchronization)
sdh_idle (Physical layer frame format:
SDH(STM-1, STM-4), empty cell format: ITU-T
specifications)
30 seconds
30 seconds
GR2K-GA-0014
Ver. 07-02