2.9
Cooling Considerations
(1) Air Flow
Figure 2-4 shows the cooling air flow for the GR2000-1B, GR2000-2B, and
GR2000-2B+ Models. Figure 2-5 shows the cooling air flow for the GR2000-BH.
Air Entrance
Figure 2-4 Air Flow for GR2000-1B, GR2000-2B, and GR2000-2B+ Models
Air Entrance
Figure 2-5 Air Flow for GR2000-BH
(2) Cooling when a GR2000-B is Installed on a Desk or Table
To ensure adequate airflow, leave at least 70 mm on each side of the router.
Caution:
!
GR2K-GA-0007
Rev. 5.00
Do not block the router's ventilation slots. Otherwise, the inside of the router
can overheat and fail or could possibly cause a fire. Ensure that there is at
least 70 mm of space from the sides of the unit.
Preparing for Installation
Air Exit
Air Exit
2-9