Hitachi GR2000 Series Configuration Commands page 276

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Description:
Default:
Examples
1. Setting parameters
To set
12:11:11:11:11:11
2. Changing parameters
To change the ARP entry MAC address
3. Displaying settings
To display all ARP table information:
4. Deleting settings
To delete an ARP entry of MAC address
Related Commands
ipx
ipx-interface
dlci
vc
Precautions
If this command is inputted in the cases where changes are made on the IP routing
protocol information, the IP multicast protocol information, and the MPLS
information, and the apply command is not being executed, the apply subcommand is
executed before the command is executed, and the changed IP routing protocol
information, IP multicast routing protocol information, and MPLS information are
reflected to the operation.
2-10
This specifies the DLCI name for Frame Relay, or VC name for
ATM.
Cannot be omitted
to MAC address to
vpvc2
, for WAN-FR:
and
11:11:11:11:11:11
11:11:11:11:11:11
12:11:11:11:11:11
to
dlci2
to :
vpvc1
:
GR2K-GA-0014
Ver. 07-02