Hitachi GR2000 Series Configuration Commands page 244

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Display settings
Parameters
Description:
Default:
Description:
:
in
:
out
Default:
Description:
Default:
Examples
1. Setting parameters (settings are inbound)
To set
2. Setting parameters (settings are inbound and outbound)
To set the IP frame condition groups named
interface designated inbound and outbound.
1-202
Sets the name of the relevant interface established in
IP-address
or
IP IP-address
Cannot be omitted
Sets inbound/outbound. Set inbound, outbound, or both
simultaneously for one interface.
Inbound (setting frame input side)
Outbound (setting frame output side)
Cannot be omitted.
Sets QoS IP frame condition group names. (Before entering
this command, establish the QoS IP frame condition group.)
Cannot be omitted.
frame condition group named
IP
settings. (Before entering this command, establish
settings.)
in the interface named
ip1
and
ip1
IP
office1
respectively in the
ip2
GR2K-GA-0014
Ver. 07-02
or
: