Figure 1-7 Range Of Qos Ip Frame Condition Information, Qos Ip Frame Condition Group Information, And Ip Qos Information Control - Hitachi GR2000 Series Configuration Commands

information to be collated into a single group. Finally, IP QoS (qos-ip) applies the
group used on each interface.
Flow Control (input)
Priority Determination
TOS Rewrite
Contracted Bandwidth
Monitoring
Priority Determination
TOS Rewrite
Contracted Bandwidth
Monitoring
Figure 1-7 Range of QoS IP Frame Condition Information, QoS IP Frame Condition
5. TOS-QoS conversion table for priority determination
This table determines the priority of incoming IP packets detected by flow control
using either the packets' TOS values or rewritten TOS values. The TOS-QoS
conversion table (qos-tos-map) command determines priority for each TOS field
precedence.
GR2K-GA-0014
Ver. 07-02
1.2.5 qos-ip-list
1.2.6 qos-ip-list-group
1.2.8 qos-ip
Flow Control (output)
List n
List 2
List 1
Regist
Sets from qos-ip-list.
Group Information, and IP QoS Information Control
Queue Control
Priority Determination
TOS Rewrite
Contracted Bandwidth
Monitoring
Group 2
Group 1
~ #
List No.
Definition
List No.
'
2
1 1
'
7
2 2
'
4
3 4
'
5
4 6
Sets from qos-ip-list-group.
Filtering/QoS Information
Transmission Control
Interface
(LINE,DLCI, etc.)
Sets from qos-ip.
: Control range of
this command
1-133