Hitachi GR2000 Series Configuration Commands page 186

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Default:
Range of value:
Description:
(*1):The relationship between the "-max" queue number 64 and the set line in
GR2000-1B and GR2000-2B is explained below:
1. 64 is effective as the maximum queue number only when set to one line (line
number zero.
2. If the "-max" queue number 64 is defined in relation to the line number zero
under a condition where multiple line information definitions are set in the same
NIF in GR2000-1B and GR2000-2B, this definition is null and void.
3. If the "-max" queue number 64 is defined in the line number zero in GR2000-1B
and GR2000-2B, and the "-max" queue number 64 is deleted under a condition
where multiple line information definitions are present in the same NIF, use the
maintenance free command for other lines.
Description:
1-144
24
1-32
(Queue cannot to be created to interface depends on the
specified value. 1-8 is for queue count 8, 9-16, for 16, and
17-32 for 32. Bandwidth is allocated equally to the specified
value within the created queue.)
Specifies the maximum queue count to be created to interface.
Invalid when queue mode is -priority, -round_robin,
-bandwidth, -equal_bandwidth.
-max_queue_number_4: The maximum queue count is 4.
-max_queue_number_8: The maximum queue count is 8.
-max_queue_number_16: The maximum queue count is 16.
-max_queue_number_32: The maximum queue count is 32.
-max_queue_number_64: The maximum queue count is 64(*1)
[ROUTE-OS6B].
-max_queue_number_250: The maximum queue count is 250.
-max_queue_number_1000: The maximum queue count is
1000.
The maximum queue number can be 64 only when set to one
line (line number zero).
Specifies the minimum bandwidth per queue. When only
queue No. is specified and the minimum bandwidth is not
specified, 0 [kbit/s] is set to minimum bandwidth. The
minimum band is set only when the queue mode is
bandwidth_kbps. The minimum band is invalid even if it is set
when the queue mode is priority, round_robin, bandwidth, or
bandwidth_traffic.
To specify the minimum bandwidth of one queue: -queue 5
(Specifies queue No. 5.)
To specify the minimum bandwidth of plural queues: -queue
5, 10, and 12 (Specifies queue No. 5, 10, and 12.)
To specify the minimum bandwidth of a range of queue:
-queue 21 to 30 (Specifies queue No. 21 to 30.)
GR2K-GA-0014
Ver. 07-02