Hitachi GR2000 Series Configuration Commands page 272

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Description:
<IPX Address>
Default:
Range of value:
Description:
<IPX Address>
Default:
Range of value:
Description:
<IPX Address>
Default:
Range of value:
Description:
<IPX Address>
Default:
Range of value:
Description:
<IPX Address>
Default:
Range of value:
2-6
This parameter specifies the network address in an 8-digit
hexadecimal number used by the Ethernet interface according
to the IEEE802.3 standard. It is only valid when the relevant
interface is Ethernet.
: Specify the pertinent network address.
None
in
1-0xfffffffe <IPX Address>
This parameter specifies the network address used by the
interface according to the standard of Ethernet V2.0, in an
8-digit hexadecimal number. It is only valid when the relevant
interface is Ethernet.
: Specify the pertinent network address.
None
This parameter specifies the network address used with LLC in
an 8-digit hexadecimal number. It is only valid when the
relevant interface is Ethernet.
: Specify the pertinent network address.
None
This parameter specifies the network address used with SNAP
in an 8-digit hexadecimal number. It is only valid when the
relevant interface is Ethernet.
: Specify the pertinent network address.
None
This parameter specifies the network address assigned to this
interface in an 8-digit hexadecimal number only when the
relevant interface is WAN or ATM.
: Specify the pertinent network address.
None
GR2K-GA-0014
Ver. 07-02