Hitachi GR2000 Series Configuration Commands page 429

Table 5-5
options: invalid maximum paths value at
<Value> not in range 1 to 16
options: invalid octet value at <Value> not in
range 0 to 255
options: out of range
options: syntax error
ospf: 2 or more areas have been defined:
need to configure backbone
ospf: authentication-key "<Key>" <Length>
longer than [ 8 | 16 ] characters
ospf: authentication-key longer than [ 8 | 16 ]
characters
ospf: day must be between 1 and 31
ospf: domain <Domain Number> duplicated
ospf: duplicate area
ospf: duplicate entry at <Address> mask
<Mask> [exact | refine]
ospf: duplicate interface address in list at
<Address>
ospf: duplicate ospf clause
ospf: duplicate ospf interface parameter -
"cost"
ospf: duplicate ospf interface parameter -
"nonbroadcast"
ospf: duplicate virtual link
ospf: error in common options -- possible
duplicate or conflicting option?
ospf: error resolving '<Host Name>': Unknown
host
ospf: gateway not a host address on an
attached network: <Address>
ospf: hour must be between 0 and 23
GR2K-GA-0014
Ver. 07-02
Routing Protocol Error Messages (continued)
The specified maximum path count in options definition is invalid.
Specify in the range of 1 to 16.
<Value>: Specified maximum path count
More than 255 values are defined in dot notation. Specify value
within the range of 0 to 255.
<Value>: Specified value
The parameter-specified range is exceeded in the input command
syntax. Numeric values of more than 4294967296 are contained.
Reconfirm a parameter.
Syntax error
Although two or more OSPF areas have been defined, a backbone
area has not been defined. Define a backbone area.
Specified authentication key is longer than 8 characters (for simple)
or16 characters (for md5). For simple, the length is up to 8
characters (or hexadecimal 16 digits). For md5, the length is up to 16
characters (or hexadecimal 32 digits).
<Key>: Specified authentication key
<Length>: Specified authentication key length
Specified authentication key is longer than 8 characters (for simple)
or 16 characters (for md5). For simple, the length is up to 8
characters (or hexadecimal 16 digits). For md5, the length is up to 16
characters (or hexadecimal 32 digits).
Specified date is invalid. Specify a value within the range of 1 to 31.
OSPF domain number is duplicated. Do not define in duplication.
<Domain Number>: Specified domain number
OSPF area ID is duplicated. Use a unique area ID.
Network range is duplicated in the ospf definition. Use a unique
network range.
<Address>: Specified address
<Mask>: Specified mask
Interface address is duplicated in the ospf definition. Use a unique
interface address.
<Address>: Specified interface address
OSPF definition is duplicated.
Delete one of the two
Interface parameter "cost" is duplicated in OSPF definition. Do not
duplicate an interface cost.
Interface type is duplicated in OSPF area definition. Do not duplicate
interface type.
In the virtual link definition of ospf, the group of a passage area and
adjacent router ID has been already defined. Specify the group of an
identical passage area and adjacent router ID so that they are not
duplicated.
In the OSPF area definition, an interface option is duplicated. Do not
duplicate an interface option.
The specified host name cannot be found. Specify the defined host
name.
<Host Name>: Specified host name
Specified gateway is not address of host on connected network.
Specify a gateway address on specified interface address.
<Address>: Specified gateway address
Specified time (hour) is invalid. Specify a value within the range of 0
to 23.
Configuration Error Messages
5-39