Figure 1-3 Control Range For Qos Discard Mode - Hitachi GR2000 Series Configuration Commands

Flow Control (input)
Priority Determination
TOS Rewrite
Contracted Bandwidth
Monitoring
: Control range of this command

Figure 1-3 Control Range for QoS Discard Mode

Precautions
The inputting form for the filter flow information includes the following two forms:
the flow filter constituting definition information, and the filter-list, filter-group and
filter-interface constituting definition information. The features of each inputting
form are shown in Table 1-1.
Table 1-1
Item
Number of entry(*1)
Inputting form
Function use, and unused unit
GR2000 Operations Commands, Vol. 2
- Indication unit for fshow filter-flow
RM Ethernet
VLAN ID detection
Display of entry count used
Filtering of local packet that coincides
with the flow detection conditions of
configuration definition information
*1: For more details, refer to Table 1-20, "Maximum Definable Entries by Each PM Mounting Memory Size," on
page 1-25.
GR2K-GA-0014
Ver. 07-02
Features of Each Constituting Definition Inputting Form for Filter Flow
Information
filter-list, filter-group,
filter-interface
1024 entry/device
Input three commands to define one
list. Effective in defining the same
flow control in multiple number of
input/output interfaces.
Device unit
Device unit and list unit
Supported.
Unsupported
Unsupported
During default setting, the local
packet that coincides with the flow
detection conditions of configuration
definition information is not treated
for filtering. Whether to treat the local
packet for filtering is determined
using a parameter.
Flow Control (output)
Queue Control
Priority Determination
TOS Rewrite
Contracted Bandwidth
Monitoring
Sets from qos-interface.
Constituting Definition Iinput Form
Filtering/QoS Information
Sets from qos-queue-list.
Transmission Control
Interface
(LINE,DLCI, etc.)
flow filter
10000 entry/device 2000 entry/RP
Input one command to define one
list. Effective in inputting a number of
entries.
Device unit, and input/output
interface unit
Input/output interface unit, and list
unit
Unsupported.
Supported
Supported
During default setting, the local
packet that coincides with the flow
detection conditions of configuration
definition information is treated for
filtering. No parameter is provided.
1-5