Hitachi GR2000 Series Configuration Commands page 229

Examples
1. Set parameter:
Sets the parameter of the flow detection condition and flow control parameter in
QoS IP frame condition list number 1.5
Flow detection condition parameter
The higher priority protocol 6 (TCP),
TOS field 32 (precedence:1 Delay:0 Throughput:0 Reliability:0),
ip_pair
Source IP address
Destination IP address
port_ pair
The higher priority source protocol board number20-21 (ftp_data, ftp),
The flow control parameter:
TOS replacing number 240 (precedence:7 Delay:1 Throughput:0
Reliability:0),
The agreed band100000bit/s,
In case of an agreed band violation drop (frame is dropped)
config:qos -yes
config:qos-ip-list 1 -protocol 6 -tos 32 -ip_pair -ip_source 123.123.1.1 \
123.123.1.123 -ip_destination 123.123.2.1 -port_pair -port_source 20
-21
replace_tos 240 -upc 1000000 -upc_penalty drop
GR2K-GA-0014
Ver. 07-02
,
123.123.1.1-123.123.1.123
,
\
,
123.123.2.1
Filtering/QoS Information
,
1-187