Hitachi GR2000 Series Configuration Commands page 313

This parameter transmits the trap in case the temperature state changes when
the Trap transmission mode is selection_trap.
This parameter transmits the trap in case a PVC failure is notified when the trap
transmission mode is selection_trap.
Examples
1. Create the following SNMP Manager entries, and show the resulting SNMP
Manager information:
SNMP Manager with IP address 10.1.1.1, community name "public," and
read-only MIB access
SNMP Manager with IP address 20.1.1.1, community name "public," and
read/write MIB access
SNMP managers that permit MIB access in the read/write mode in
community name "event-monitor" and IP address 30.1.1.1 and send
"bgpEstablished," "bgpBackwardTransition," "risingAlarm" and "fallingAlarm"
traps
SNMP managers that permit MIB access in the read mode in community
name "private" and IP address 40.1.1.1, limit opportunities for the issuance
of the cold start trap and send version 2 of the standard trap
SNMP managers that permit MIB access in the read/write mode in
community name "public-v6" and IP address 3ffe::|.
GR2K-GA-0014
Ver. 07-02
SNMP Information
3-5