Line Information (Ethernet/Gibabit Ethernet) - Hitachi GR2000 Series Configuration Commands

4.7.3

Line Information (Ethernet/Gibabit Ethernet)

Input Format
d e f a u l t
Parameters
The initial value items that can be set using line Information (Ethernet/Gibabit
Ethernet) and the initial values during initial installation are shown in Table 4-3. For
details of each parameter, refer to the configuration definition information in "line
Information (Ethernet/Gibabit Ethernet)."
Table 4-3
Information
Information Name
Group Name
line Information Segment standard of 10BASE-T and
(Ethernet / 100BASE-TX
Gigabit
Flow control function option in
Ethernet)
1000BASE-LX, 1000BASE-SX, and
100BASE-LH
MTU length of 1000BASE-LX,
1000BASE-SX, and 100BASE-LH
Segment standard of 1000BASE-LX,
1000BASE-SX, and 100BASE-LH
10BASE-T,
100BASE-TX, 1000BASE-LX,
1000BASE-SX, TPID option in
100BASE-LH
GR2K-GA-0014
Ver. 07-02
List of Initial Value Items that Can Be Set Using line Information (Ethernet /
Gigabit Ethernet) and Initial Values During Initial Installation
Operation Management Information
Initial Value
Automatic recognition (auto negotiation)
Enable
1500 bytes
1000M full-duplex
0x8100
4-35