Choosing Between Funk And Microsoft Security; Selecting A Funk Security Profile - Intermec CK3 User Manual

Chapter 2 — Connecting and Configuring the CK3

Choosing Between Funk and Microsoft Security

42
The CK3 supports both Funk and Microsoft security. The option you
choose depends on your network security needs.
Understanding Microsoft and Funk Security
Security Choice Description
Microsoft Microsoft security dynamically selects wireless networks
based on your preferences. If you are primarily using the
CK3 to connect to Wi-Fi hotspots, you may want to use
Microsoft security.
To use Microsoft security, you need to select it as your
security choice. For help, see
Your Security Choice" on page
Funk (default) Funk security offers features that are similar to Microsoft
security, but Funk also offers these features:
•
•
•
If you are using the CK3 in a static environment that
requires a high level of security, you should use Funk
security.
To use Funk security, you need to select a profile. For help,
see the next section,

Selecting a Funk Security Profile

You can define up to four profiles for Funk security. Different profiles
let your CK3 communicate in different networks without having to
change all of your security settings. For example, you may want to set
up one profile for the manufacturing floor and one for the
warehouse. By default, the active profile is Profile 1.
Note: You can also use the Profile Wizard to configure most wireless
security settings. To start the Profile Wizard, tap the iConnect icon
( ) in the lower right corner of the Today screen and select Tools >
Wireless Settings.
To select a Funk security profile
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Funk Security.
CCX v4.0 compliance
Support for LEAP and TTLS
Configuration of up to four profiles
"Selecting a Funk Security Profile."
CK3 Mobile Computer User's Manual
"Selecting Microsoft as
47.