Sending The Information To Loghost - 3Com 5500-SI Configuration Manual

5500 series
Hide thumbs Also See for 5500-SI:
Table of Contents

Advertisement

474
C
22: F
S
HAPTER
ILE
YSTEM
Sending the Information
to Loghost
M
ANAGEMENT
6 Sending the Information to SNMP
Table 528 Sending the Information to SNMP
Device
Configuration
Switch
Enable info-center
Set the information output
direction to SNMP
Set information source
Configuring SNMP features -
Network
The same as the SNMP
management
configuration of the Switch
workstation
7 Turn on/off the information synchronization Switch in Fabric
Figure 124 Turn on/off the Information Synchronization Switch in Fabric
Device
Configuration
Switch
Enable info-center
Set the information
output direction to
SNMP
To send information to the loghost, follow the steps below:
1 Enabling info-center
Perform the following operation in System View.
Table 529 Enable/Disable Info-Center
Operation
Enable info-center
Disable info-center
Info-center is enabled by default. After info-center is enabled, system performances
are affected when the system processes much information because of information
classification and outputting.
2 Configuring to output information to loghost
Perform the following operation in Table 530.
Default value
By default,
info-center is
enabled.
-
-
-
Default Value
By default, info-center is
enabled.
By default, Switches of master
log in Fabric, debugging and trap
information synchronization are
turned on, so as log and strap
information synchronization
Switches in other Switches.
Command
info-center enable
undo info-center enable
Configuration description
Other configurations are valid only
if the info-center is enabled.
-
You can define which modules and
information to be sent out and the
time-stamp format of information,
and so on. You must turn on the
Switch of the corresponding
module before defining output
debugging information.
See RMON Configuration
-
Configuration Description
Other configurations are valid
only if the info-center is
enabled.
This configuration can keep
log information, debugging
information and trap
information in Fabric in every
Switch synchronized.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500-ei5500g-ei

Table of Contents