Operation; Basic Operations; Selecting A Channel - Strong SRT 5410 User Manual

Operation

Basic operations

Selecting a channel

There are a number of ways to select a channel:
• Number pad on the remote control: If you know the channel number, enter the number using
the number keys on the remote control and then press OK. (If you don't press OK, the channel
selected appears after 2 seconds.)
NOTE: The
Some samples of primary LCN channel numbers are:
1 = Ten network and affiliates
2 = ABC
3 = SBS
7 = Seven network and affiliates
9 = Nine network and affiliates
Secondary channels can be selected by pressing the primary number followed by another
number. (For example, pressing 2 gives you ABC1, and pressing 22 gives you ABC2.)
• Channel list: Press OK on the remote control. This displays the channel list (which shows the
channel number and channel name of all the scanned channels). Press
control to select the channel you want, press OK and then press EXIT.
To list radio stations rather than TV channels, press
If you have placed channels in a favourites list, the channels displayed on the channel list might
only be those channels in a favourites list. (It depends on previous choices you have made.) To
see the channels in another favourites list, or to see all the channels, press
channel you are interested in appears.
TIP: Press a PAGE button to quickly scroll through a long list of channels.
uses the Logical Channel Numbering system (LCN) by default.
or or press TV/RADIO.
18
or on the remote
or until the