Strong SRT 5410 User Manual page 44

4. Select the type of reset:
• To return the
information and settings you have added), highlight Factory Reset and press OK.
• To clear all the channels and stations, but keep your user settings, highlight Channel List
Reset and press OK.
5. A warning message appears advising you of what will be deleted if you continue. To continue,
press or to select OK and then press OK on the remote control (or press OK when Cancel is
highlighted to cancel your changes).
6. If asked, enter the password. A further message appears asking you if you are sure you want to
proceed. To continue with the reset, make sure OK is highlighted and then press OK on the
remote control.
If you selected Factory Reset, the installation wizard appears. For help with the wizard, see
"Installation wizard" on page 13.
If you selected Channel List Reset, the Channel Search sub-menu appears. If you want to
continue using your
for channels and stations" on page 34.
to its factory settings (thus erasing all channel and station
, you will need to rescan for channels. For help, see "Rescanning
44