Strong SRT 5410 User Manual page 40

To set security settings, or to change the password:
1. Press MENU on the remote control.
2. If User Settings is not highlighted in the main menu at the left of the screen, press
and then press OK.
The User Settings sub-menu appears.
3. If Lock is not highlighted in the sub-menu, press
4. Enter the password.
If you have not changed the default password, the password is 0000.
The Lock window appears.
5. If you want to set an age lock—thus requiring the password to be entered before any age-
rated program can be viewed—press
press to move to the Change Password field and continue from step 7.
6. If you set an age lock, press
age such that any program with a higher age rating can only be viewed if the password is
entered. You can choose an age between 7 and 18. When you have chosen an age, press
to move to the Change Password field.
7. If you want to change the current password, enter the current password in the Change
Password field. The current password is either:
• 0000 if you have not set a password before (0000 is the default factory setting); or
• whatever password was last set for the
8. If you have chosen to change the password, the New Password option will be highlighted. Enter
a new 4-digit password sing the numeric keys on the remote control.
9. If you have chosen to change the password, the Confirm Password option will now be
highlighted. Enter the same password you entered in the previous step.
10. If you want to lock access to menus unless the password is entered, press
Menu Lock field to Yes.
11. Press EXIT, and then click OK when asked if you want to save the changes.
12. Press MENU to return to normal viewing.
or
or to change the Age Lock field to Yes. Otherwise,
to move to the Age Limit field and then press
40
until it is and then press OK.
.
or until it is
or to select the
or to change the