Re-Sorting Channels And Stations - Strong SRT 5410 User Manual

7. Press , , or
The highlighted character replaces the previous name near the top of the screen. Continue to
move to and select characters until you have finished spelling the new name of the channel or
station.
If you select the wrong character, press the small red button on the remote control to delete it.
To cancel the new name and restore the previous name, press EXIT and ignore the rest of this
procedure.
8. When you have finished spelling out the new name, press the green button on the remote. The
Edit Channel window re-appears, showing the new name of the channel or station.
9. If you want to rename another channel or station, repeat from step 5.
10. Press MENU or EXIT.

Re-sorting channels and stations

1. Press OK. The channel list is displayed.
2. To resort radio stations rather than TV channels, press TV/RADIO. (Pressing TV/RADIO again
redisplays the TV channels.)
3. Press the smaller red button in the remote control. The Sort sub-menu appears.
The order in which the channels or stations are currently displayed is shown in green at the top
of the sub-menu. (In the example above, the current order is by LCN—Logical Channel
Numbering.)
4. Press or until the sort order you want is highlighted.
until the first character of the new name is highlighted, and then press OK.
24