Operation; Switching The Receiver On And Off; Channel Selection - Strong SRT 8203 User Manual

6.0 OPERATION

In this section you will find the most frequently used functions of the receiver.

6.1 Switching the receiver on and off

To switch your receiver ON and OFF, press q. This button is located on the remote control unit of the
receiver.
Press q to switch the receiver into the operating mode.
Press q again to switch the receiver into standby mode.
NOTE:
If you plan not to use the receiver for a longer time, please completely disconnect the receiver from the
power source - just simply unplug the power adapter from the outlet.

6.2 Channel selection

6.2.1 Switch channels in viewing mode
For sequential switching of channels in viewing mode you can use buttons p/q (CH+/CH-).
For direct switching to a channel with a certain number you can dial the channel number by using the
buttons 0-9.
6.2.2 Switch channels via the channel list, switching between favourite channels
Press OK on the remote control in viewing mode to switch between channels via the channel list.
A list of stored channels in the receiver will be displayed on the TV screen.
Use p/q to highlight a channel in the channel list and press OK.
The channel list window will disappear from the screen and the receiver will switch to the selected
channel.
NOTE:
NOTE:
Use 7/8 to switch between groups of Favourite channels in the channel list.
6.2.3 Switching between TV and radio channels
The receiver supports the following channel lists:
List of TV channels (if present in broadcasting);
„ „
List of radio channels (if present in broadcasting);
„ „
Press TV/R in viewing mode to switch between TV and radio channels.
6.2.4 Favourite channel lists
The receiver supports up to 4 favourite channel lists: Fav1,... Fav4.
Press FAV in viewing mode to enter favourite channel lists window.
Use p/q to select a channel, then use the COLOUR BUTTONS to add/remove the channel to/from the
favourite list according to the buttons definition on the screen helpline. A selection symbol will appear
and the programme will be included into favourite list of your choice.
10
In standby mode the receiver does not consume more than 1.00 W of
power.
Use t/u to switch pages up and down in the channel list.
You could find a channel by its name using YELLOW Find. You could enter
from the virtual keyboard on-screen one or more of the first letters of the
channel name (only in Latin) to set the filter.
English