Setting Display Options; Setting The Time - Strong SRT 5410 User Manual

Setting display options

You can set how long information panels stay on the screen before they fade-out and how
transparent menus and information panels are to be. You can also restore the default settings after
you have made changes.
1. Press MENU on the remote control.
2. If User Settings is not highlighted in the main menu at the left of the screen, press
and then press OK.
The User Settings sub-menu appears.
3. If Display is not highlighted in the sub-menu, press
The Display sub-menu appears.
4. Press or until an option you want to change is highlighted.
5. Press OK to display a menu of values, press
and then EXIT.
6. If you want o change another option, repeat from step 4.
NOTE: If you changed a setting but want to restore it to its default value (that is, the value it
had when the
to Yes.
7. Press MENU, and then click OK when asked if you want to save the changes.

Setting the time

The time is set for you automatically once you have scanned and detected digital stations. If you
find that the time is not correct, you can change it as follows:
1. Press MENU on the remote control.
2. If User Settings is not highlighted in the main menu at the left of the screen, press
and then press OK.
The User Settings sub-menu appears.
left the factory), select the Load Default option and set its value
or until it is and then press OK.
or to highlight the value you want, press OK
38
or until it is
or until it is