Software upgrades
If a new version of the
to your PC and then transfer it to your
with the
upgrades.
1. Once you have obtained an upgrade file, transfer it to a USB memory stick and insert the stick in
the USB port on the rear of the
2. Press MENU on the remote control.
3. If Tools is not highlighted in the main menu at the left of the screen, press
then press OK.
The Tools sub-menu appears.
4. If S/W Upgrade is not highlighted in the sub-menu, press
5. The USB Upgrade sub-menu appears. Press OK to display the USB Upgrade screen.
6. Press
or
until the upgrade file is highlighted and then press OK.
The upgrade process will take a few minutes, and then you will be returned to normal viewing.
Clearing and resetting data
You can reset the
•
clearing all the channels and stations or
•
clearing all channels, stations, preferences and other user settings (thereby restoring the unit to
the default settings it had when it left the factory).
1. Press MENU on the remote control.
2. If Tools is not highlighted in the main menu at the left of the screen, press
then press OK.
The Tools sub-menu appears.
3. If System Reset is not highlighted in the sub-menu, press
The System Reset sub-menu appears.
software becomes available, you can download the software
). Watch the Strong Technologies website for announcements of software
, either by:
. You will need a USB memory stick (not supplied
(socket 9 in the diagram on page 8) and your PC.
or
until it is and then press OK.
or
until it is and then press OK.
43
or
until it is and
or
until it is and