Window 1: Thank You; Window 2: Language Setting; Window 3: Connect Antenna - Strong SRT 5410 User Manual

• If there are a number of settings on a window, you press
NOTE: The settings you choose using the installation wizard can be changed later from the
menus.

Window 1: Thank You

The first window on the installation wizard is the welcome window (shown above). When you are
ready to begin configuring your
Language Setting window appears.

Window 2: Language Setting

On the Language Setting window you select the language for the menus you will see on your TV
once you start using the
1. If you need to choose a language other than the one showing, press
you want is showing.
2. Press the blue button on the remote control to proceed to the Connect Antenna window.

Window 3: Connect Antenna

1. The antenna lead coming from your antenna wall plate needs to be connected to the ANT IN
socket on the
connected the
2. Press the blue button on the remote control to proceed to the Connection Guide window.
, press the blue button on the remote control. The
.
(socket 1 in the diagram on page 8 above). If you have not yet
to an antenna, do so now.
14
or to move from one to another.
or until the language