Strong SRT 5410 User Manual page 36

4. In the Channel List field, press
appears.
5. Press to move to the Search Mode field and then press
search mode: All or FTA Only (that is, search for all channels from the specified broadcaster or
just those that are free-to-air).
6. Press the smaller red button on the remote control. The
7. If the channel or channels can be found, the details are shown on the screen. A message
appears asking you to confirm that you want to save details of the channels and stations that
have been detected. Press OK to save the details (or press
press OK to reject the channels and stations).
If the channel or channels cannot be found, a message appears to that effect. Press OK to
close the message.
8. Press MENU to return to normal viewing.
or until the appropriate channel number or frequency
36
or to select the appropriate
begins scanning.
or to select CANCEL and then