Installing The Batteries In The Remote Control - Strong SRT 5410 User Manual

13. [Green button] Performs different functions
in different menus
14. TXT: To show or hide Teletext
15 STB/TV: To switch audio–visual input
between the TV and the
vice versa
16. PAUSE: To freeze or unfreeze the screen
17. [Standby]: To switch between power-on
and stand-by modes
18. EPG (Electronic Program Guide): To show
the TV and radio program guide
19. MENU: To display the main menu, or return
to normal viewing
20. : To choose the next channel, or change
an option or setting in a menu
21. EXIT: To close the current menu and return
to the previous menu or screen
22. : To increase volume, or change an
option or setting in a menu

Installing the batteries in the remote control

1. Press down on the retaining catch on the lid of the battery recess and remove the lid.
2. Insert two AAA batteries into the recess.
Be careful to insert the batteries as shown in the diagram inside the recess.
3. Replace the lid over the recess and gently push down on the lid until it snaps firmly into place.
23. To choose the previous channel, or
change an option or setting in a menu
24. P+: To choose the next channel, or change
an option or setting in a menu
and 25. P–: To choose the previous channel, or
change an option or setting in a menu
26. PAGE [ ]: To move to the next page if there
is more than one page
27. RECALL: To return to the previous channel.
(Also performs various functions in the
menus.)
28. [Yellow button] Performs different functions
in different menus
29. TV/RADIO: To switch between TV and radio
(and vice versa)
30. SUBT: To turn subtitles on or off
31. V.Format: To choose a video mode (1080i,
720p, 576p or 576i)
10