Quick Guide To Using Your Receiver; Operation; Changing Channels - Strong SRT 8205 User Manual

Use  to move the highlight to the setting you wish to alter and use   to change values.
Region:
Subtitle:
Aspect Mode:
Scan Mode:
* Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via Teletext, if available.
When all settings have been made, move the highlight to OK and press OK to continue.
The receiver will now advance to the Aerial Adjustment screen.
This part of the wizard is of great help when setting up your antenna system.
Use  to move the highlight to the setting you wish to alter and use   to change values.
The following settings are available:
Antenna Power:
Channel No.:
Beeper:
When all settings have been made, press OK to start scanning.
The receiver will search for all available channels now. Once scanning is nished, the receiver switches
to viewing mode.

5.0 QUICK GUIDE TO USING YOUR RECEIVER

We at STRONG understand that you can't wait to enjoy your new digital terrestrial receiver.
The following chapter will make you familiar with the basic operation of this device.
We do, however, advice you to read all chapters of this manual to get the best performance from
your receiver.
To turn your receiver ON or to Standby, use the q button on the remote control.

Choose a channel with  on the remote control. Alternatively, you can digit the channel

number with the 0~9 buttons on the remote control or press OK in viewing mode to display the
channel list.
The volume can be adjusted with   or VOL+/VOL .


6.0 OPERATION

Your new receiver is equipped with several features to make watching TV a true pleasure. This
chapter describes these features.
Please also read chapter 7.0 to get familiar with the menu of your receiver.

6.1 Changing channels

Following ways are possible for changing channels with your new receiver:
Select your region where this receiver is used.
Select Normal to display subtitles per default, select Hard of Hearing to show
HoH subtitles per default. Select O to hide subtitles per default.*
Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are: Auto (automatic detection of aspect
ratio), 4:3 PS (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),
4:3 LB (black bars on top and under the picture on a 4:3 TV) and 16:9 (use this
setting for 16:9 TV sets).
Select Free or All to scan corresponded type of channels.
Set to On if you use an active antenna. When set to On, 5 V will be present at
the RF IN connector of the receiver. Select O for passive antennas.
Select a channel that is known to carry a broadcast in your region. The Signal
Strength and Signal Quality bars give a visual indication of the reception.
Adjust your antenna to obtain maximum signal strength and quality.
Select On for an audible indication of signal reception. O (default) turns the
beeper o .
9