Setting Or Deleting A Timer - Strong SRT 5410 User Manual

Setting or deleting a timer

1. Press MENU on the remote control.
2. If User Settings is not highlighted in the main menu at the left of the screen, press
and then press OK.
The User Settings sub-menu appears.
3. If Timer is not highlighted in the sub-menu, press
The Timer Setting window appears, listing any timers you have already set.
4. To delete all listed timers, press the yellow button on the remote key.
5. To delete a particular timer, press
on the remote control.
6. To add a new timer, press the red button on the remote key. The Timer Event window appears.
7. The default timer mode is Channel Change. In this mode, the
whatever channel you specify at the date and time you specify. The other modes available are
Power Off and Power On. To switch modes, press
8. Press to move to the Channel field and press OK.
9. Press or until the channel or station you want to come on at the specified time is
highlighted and then press OK.
If the channel or station is not listed when you display the channel list, press
displays it.
or until it is and then press OK.
or until it is highlighted and then press the green button
or
33
will switch to
until the mode you want is highlighted.
or until it is
or until the list