Automatically Setting A Timer; Watching A Selected Channel; Using The Timer - Strong SRT 5410 User Manual

3. If there is more than one page of information about the program, press a PAGE button on the
remote control to display the next page.
4. Press INFO to close the information window.

Automatically setting a timer

A timer enables you to specify a time at which a particular event occurs: turning, turning it off or
changing the channels. You can automatically create a timer from the EPG.
1. If necessary, press
If that program already has a timer set for it, a blue icon appears near the top right corner of
the screen.
2. Press the blue button on the remote control. A timer is automatically set with the details of the
selected program. The default timer mode is to turn on the TV. If you want the timer simply to
change to the selected channel, press the blue button one more time. (You can cycle through
the available timer modes—turn on, change channels and cancel timer—by repeatedly
pressing the blue button.)
Timers are discussed in detail in "Using the timer" on page 32.

Watching a selected channel

1. If necessary, press
2. Press EPG. The EPG closes with the selected program is playing.

Using the timer

You can set up to eight times at which the
turns on, or turns off.
There are two ways to set or cancel a timer: from the EPG and from the User Settings menu. See
"Automatically setting a timer" on page 32 for instructions on how to set a timer from the EPG. The
following section explains how to set a timer from the User Settings menu.
or until the program you want to switch on or turn over to is highlighted.
or until the program you want to watch is highlighted.
switches to specified channel (or station),
32