Operation; Changing Channels - Strong SRT 8109 User Manual

To turn your receiver ON or to Standby, use the q button on the remote control.
Choose the desired channel with the  buttons. Alternatively, you can digit the channel number with
the 0~9 buttons on the remote control. Or press OK in viewing mode to display the channel list. The
volume can be adjusted with the   buttons.

6.0 OPERATION

Your new receiver is equipped with several features to make watching TV a true pleasure. This paragraph
describes these features. Please also read chapter 7.0 to get familiar with the menu of your receiver.

6.1 Changing channels

Your n ew receiver is equipped with three ways to change channels.
Via direct access using the 0~9 buttons.

Via the channel list trough OK button.

Via the  keys.

Via 7 8 Jump per page in Channel List.

6.1.1 Direct access via 0~9 buttons
To gain direct access to a certain channel, simply input its number with the 0~9 keys on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits
is possible. Just wait a few seconds and your receiver will switch to the selected channel or press OK
immediately after selecting the channel number.
6.1.2 Channel list
Press OK in viewing mode to display the Channel List. Use  in the Channel List to highlight your
channel of choice and press OK once to select the highlighted channel.
TIP:
Use the COLOURED BUTTONS for several options like finding a channels more quickly, if the list is
very long, either by popup keyboard GREEN, by first digit BLUE, by type RED or change the order of
the channel list use the YELLOW button. Sorting can be done Alphabetical, (A to Z, Z to A), Free to Air
channels or scrambled channels first, Locked or unlocked channels first. Select Default to revert to the
original list, before making changes in the channel order. Press OK to confirm.
6.1.3 Using the

 switches to the next channel.
 switches to the previous channel.
If the channel list is on screen:
8 switches to the next 10 channels
7 switches to the previous 10 channels.
Use TV/R to toggle between the TV List and Radio List without the channel
list on screen.
or 7 8 keys
9