For connector location information about the RAID card, hot-swap hard-disk-drive backplane, and the
system board, refer to the related topics in "Locations" on page 13.
For information about connecting the appropriate power connector of the power supply to the backplane,
see "Hot-swap hard-disk-drive backplane" on page 35.
System board components
Your server system board is a six-layer micro-ATX board based on the Intel Bromolow platform. The
following illustration shows the component locations on the system board.
Figure 29. System board components
1
Power Management Bus (PMBus) connector
2
3
Memory slot 4 (DIMMB2)
4
Memory slot 3 (DIMMB1)
5
Memory slot 2 (DIMMA2)
6
Memory slot 1 (DIMMA1)
7
iButton socket
8
9
10
11
20
21
22
Internal dual-port USB 2.0 connector 1
23
24
25
26
27
28
29
30
.
Chapter 3
Product overview
45