Replacing The System Board - Lenovo ThinkServer TS430 Hardware Maintenance Manual

6. Remove the old system board battery.
Figure 105. Removing the system board battery
7. Install a new system board battery.
Figure 106. Installing the system board battery
8. Reinstall the PCI card that has been removed. See "Installing a PCI card" on page 98.
9. Dispose of the old system board battery as required by local ordinances or regulations.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to "Completing the parts replacement" on page 177. After you replace
the system board battery, you must reset passwords, reset system date and time, and reconfigure the
server. See Chapter 5 "Configuring the server" on page 57.

Replacing the system board

Attention: Do not open your server or attempt any repair before reading and understanding the "Safety information"
on page iii and "Guidelines" on page 85.
This topic provides instructions on how to replace the system board.
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
.
Chapter 6 Installing, removing, or replacing hardware
171