Download  Print this page

Advertisement

Table of Contents
Machine Types:

Advertisement

Table of Contents

   Also See for Lenovo ThinkServer TS430 0387

   Related Manuals for Lenovo ThinkServer TS430 0387

   Summary of Contents for Lenovo ThinkServer TS430 0387

  • Page 1 Machine Types:...
  • Page 2 Note: Read Me First Eleventh Edition (March 2015) © Copyright Lenovo 2011, 2015.
  • Page 3: Table Of Contents

    Contents Safety information ..Chapter 1. General information ..1 Chapter 2. Server setup road map . . . 5 Chapter 3. Product overview ..7 Chapter 6.
  • Page 4 Chapter 8. FRU lists ..Chapter 9. Getting information, help, and service ... . . Appendix A. Notices ..Chapter 7.
  • Page 5: Safety Information

    Safety information Note: 製品をご使用になる前に、製品に付属の Documentation DVD に収録されているマルチリンガルの「安 全に正しくご使用いただくために」を読んで理解してください。 제품을 사용하기 전에 제품과 함께 제공되는 문서 DVD의 다국어 안전 지침을 주의 깊게 읽어보십시오.
  • Page 6 在使用本产品之前,请务必先阅读和了解产品附带的文档 DVD 中的多语言安全说明。 使用本產品之前,請務必閱讀並瞭解產品隨附的文件 DVD 上的多國語言版本安全資訊。 Important: Safety Information Safety Information...
  • Page 7 Statement 1 DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. Connect all power cords to a properly wired and grounded electrical outlet. Ensure that all power cord connectors are securely and completely plugged into receptacles.
  • Page 8 Statement 3 CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: • Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. •...
  • Page 9 Statement 6 CAUTION: If you install a strain-relief bracket option over the end of the power cord that is connected to the device, you must connect the other end of the power cord to a power source that is easily accessible in case it needs to be disconnected.
  • Page 10 Statement 11 CAUTION: The following label indicates a potential heat hazard. Statement 12 DANGER Overloading a branch circuit is a potential fire hazard and a shock hazard under certain conditions. To avoid these hazards, ensure that your system electrical requirements do not exceed branch current ratings at the installation site.
  • Page 11 Statement 16 CAUTION: To reduce the risk of electric shock or energy hazards: • This equipment must be installed by trained service personnel in a restricted-access location, as defined by your local electrical code and the latest edition of IEC 60950. •...
  • Page 12: Safety Inspection Guide

    Statement 20 CAUTION: A lithium ion battery is provided. To avoid possible explosion, do not burn the battery. Replace the battery only with the Lenovo-approved part. Recycle or discard the battery as instructed by local regulations. Safety inspection guide Grounding requirements...
  • Page 13: Chapter 1. General Information

    Chapter 1. General information Introduction Hardware Maintenance Manual Note: Hardware Maintenance Manual Hardware Maintenance Manual Self-service CRUs Optional-service CRUs FRUs Notes: Warranty and Support Information Warranty and Support Information Server documentation...
  • Page 14 Printed documents Read Me First Important Notices Documentation DVD Note: Safety Information Warranty and Support Information Lenovo License Agreement User Guide...
  • Page 15 ThinkServer Management Module User Guide Note: MegaRAID SAS Software User Guide Note: Document for trained service personnel only Hardware Maintenance Manual...
  • Page 17: Chapter 2. Server Setup Road Map

    Chapter 2. Server setup road map...
  • Page 19: Chapter 3. Product Overview

    Chapter 3. Product overview Server package Figure 1. Server package Features Personal Systems Reference...
  • Page 20 Microprocessor Memory Power supply Note: Fans...
  • Page 21 Internal drives Note: Expansion slots Input/Output (I/O) features Video subsystem...
  • Page 22 Ethernet connectivity Reliability, availability, and serviceability Security features Note: Basic system management features Remote Management Module User Guide...
  • Page 23 Advanced system management features Note: Remote Management Module User Guide...
  • Page 24: Specifications

    Note: Remote Management Module User Guide Specifications Dimensions Weight Environment Electrical input Software ThinkServer EasyStartup ThinkServer EasyStartup...
  • Page 25 ThinkServer EasyUpdate Firmware Updater BIOS and TMM update utilities RAID configuration utilities Lenovo ThinkServer EasyManage Remote management software ThinkServer Management Module User Guide Diagnostic programs Locations Machine type, model, and serial number label...
  • Page 26 Note: Figure 2. Machine type, model, and serial number labels...
  • Page 27 Front view of the server Figure 3. Front view of the server Front panel Optical drive bay 2...
  • Page 28 Optical drive bay 1 Optical drive eject/close button Optical drive status LED Front door Front door lock Front door handle Intelligent Diagnostics Module panel...
  • Page 29 Front panel Figure 4. Front panel Power switch with power status LED...
  • Page 30: Intelligent Diagnostics Module

    Power status LED Color Description Hard-disk-drive status LED Hard-disk-drive status LED Color Description NIC 1 status LED NIC 2 status LED Description NIC status LED Color System status LED Description System status LED Color Front USB connector 1 Front USB connector 2 Intelligent Diagnostics Module...
  • Page 31: Rear View Of The Server

    Note: Figure 5. IDM panel 1 2 3 5 Error LEDs Ambient temperature over limit LED Rear view of the server...
  • Page 32 Figure 6. Rear view of the server with a non-hot-swap power supply assembly...
  • Page 33 Figure 7. Rear view of the server with hot-swap redundant power supplies Power cord connector(s) Serial port VGA DB-15 connector USB connectors...
  • Page 34: Server Locks

    Expansion card area Note: Physical link width Negotiable link width Supported card length and height Ethernet connectors Notes: Note Ethernet status LED Color Status Description Front door key Note: Server locks...
  • Page 35 Note: Padlock Figure 8. Padlock...
  • Page 36 Integrated cable lock Kensington Figure 9. Integrated cable lock...
  • Page 37: Server Components

    Front door lock Figure 10. Front door lock Server components...
  • Page 38 Figure 11. Components of server models with five to eight 3.5-inch hot-swap hard disk drives...
  • Page 39 Note: Note:...
  • Page 40 Figure 12. Components of server models with up to eight 2.5-inch hot-swap SAS hard disk drives Note:...
  • Page 41 Note:...
  • Page 42 Figure 13. Components of server models with up to four 3.5-inch hot-swap hard disk drives Note: Note:...
  • Page 43 Figure 14. Components of server models with up to four 3.5-inch non-hot-swap hard disk drives Note:...
  • Page 44 Note: Hot-swap hard-disk-drive status LEDs Note: Figure 15. 3.5-inch hot-swap hard-disk-drive status LEDs...
  • Page 45: Raid Card

    Figure 16. 2.5-inch hot-swap hard-disk-drive status LEDs Hard-disk-drive activity LED Hard-disk-drive RAID status LED Description RAID card...
  • Page 46 Notes: ThinkServer RAID 500 Adapter Figure 17. ThinkServer RAID 500 Adapter Port 0 Port 1 RAID 5 key connector External connector...
  • Page 47 ThinkServer RAID 700 Adapter Figure 18. ThinkServer RAID 700 Adapter Ports 7-4 Ports 3-0 External connector Board-to-board connector Hot-swap hard-disk-drive backplane...
  • Page 48 Notes: Figure 19. Hot-swap hard-disk-drive backplane locations Backplane for 3.5-inch hot-swap hard disk drives...
  • Page 49 Figure 20. Front view of the 3.5-inch hot-swap hard-disk-drive backplane Figure 21. Rear view of the 3.5-inch hot-swap hard-disk-drive backplane 8-pin power connector Mini-SAS signal cable connector...
  • Page 50 Backplane for 2.5-inch hot-swap hard disk drives Figure 22. Front view of the 2.5-inch hot-swap hard-disk-drive backplane Figure 23. Rear view of the 2.5-inch hot-swap hard-disk-drive backplane 8-pin power connector...
  • Page 51 Mini-SAS signal cable connector 2 Mini-SAS signal cable connector 1 Connecting the cables Connecting cables for models with five to eight SAS or SATA II 3.5-inch hot-swap hard disk drives and two backplanes Note:...
  • Page 52 Note: Figure 24. Connecting cables for models with five to eight SAS or SATA II 3.5-inch hot-swap hard disk drives and two backplanes...
  • Page 53 Connecting cables for models with up to eight 2.5-inch SAS hot-swap hard disk drives and one backplane Note:...
  • Page 54 Note: Figure 25. Connecting cables for models with up to eight 2.5-inch SAS hot-swap hard disk drives and one backplane Connecting cables for models with up to four 3.5-inch hot-swap hard disk drives and one backplane...
  • Page 55 Note: Connecting the SATA hard disk drives to the system board Notes: SATA signal cable label System board SATA connector SATA connector 0 SATA connector 1 SATA connector 2 SATA connector 3 Figure 26. Mini-SAS signal cable with four SATA ports and one SGPIO port Connecting the SATA hard disk drives to a required RAID card...
  • Page 56 Note: Note: Figure 27. Connecting cables for models with one 3.5-inch hot-swap hard-disk-drive backplane and a ThinkServer RAID 500 Adapter Figure 28. Connecting cables for models with one 3.5-inch hot-swap hard-disk-drive backplane and a ThinkServer RAID 700 Adapter...
  • Page 57: System Board Components

    System board components Figure 29. System board components...
  • Page 58 PMBus connector TPM connector Memory slots iButton socket Main power connector 5-pin system fan 2 connector Microprocessor...
  • Page 59 Intel C202 chip 4-pin system fan 1 connector SATA connectors ThinkServer Management Module Premium connector Internal USB 2.0 Type A connector Internal dual-port USB 2.0 connector 2 Internal dual-port USB 2.0 connector 1 System board battery Front panel connector System board jumper blocks SATA SGPIO connector Hard-disk-drive LED connector...
  • Page 60: System Board Jumpers

    Intelligent Diagnostics Module connector Internal serial connector PCI card slot (PCI slot 1) PCI Express x8 card slot (PCI-E slot 2) ThinkServer Management Module chip PCI Express x8 card slot (PCI-E slot 3) PCI Express x16 card slot (PCI-E slot 4) Microprocessor fan connector System fan 3 connector Microprocessor power connector...
  • Page 61 Figure 30. Default jumper setting...
  • Page 62 Figure 31. System board jumpers Attention: Clear CMOS /Recovery jumper Note:...
  • Page 63 TMM Enable/Disable jumper (also known as BMC Enable/Disable jumper) BIOS recovery jumper Clear password jumper Manufacturing jumper...
  • Page 64: System Board Leds

    System board LEDs Figure 32. System board LEDs System board hardware fault LED...
  • Page 65 TMM status LED (also known as BMC status LED) TMM status LED Color Description POST code diagnostic LEDs POST code diagnostic LED Binary symbol Note: Description POST code diagnostic LEDs POST error code...
  • Page 66 POST code diagnostic LEDs POST error code Description...
  • Page 67: Chapter 4. Turning On And Turning Off The Server

    Chapter 4. Turning on and turning off the server Turning on the server Turning off the server CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord.
  • Page 69: Chapter 5. Configuring The Server

    Chapter 5. Configuring the server Using the Setup Utility program Starting the Setup Utility program Viewing information in the Setup Utility program Main Advanced Processor Configuration Memory Configuration SATA Configuration SATA Port0 SATA Port5...
  • Page 70: Setup Utility Program Interface

    Server Management System Information Setup Utility program interface Notes: BIOS Setup Utility Main Advanced Security Server Management Boot Options Boot Manager Exit Main menu Main...
  • Page 71 Main Figure 33. An example of the Main menu in the Setup Utility program Main Advanced menu Advanced Advanced Advanced Notes: Enabled Disabled boldface Selections Advanced Menu item Submenu item Selections Comments Processor Configuration Enabled Enabled...
  • Page 72 Menu item Submenu item Selections Comments Enabled HW_ALL Enabled Enabled ACPI C2 Disabled No Limit Enabled Enabled Memory Configuration Disabled Chipset Configuration Enabled Enabled Enabled Disabled Last State...
  • Page 73 Menu item Submenu item Selections Comments Stay off Last State Power IDE Mode SATA Configuration RAID Mode PCI Configuration Enabled Add-On Add-On Enabled Enabled...
  • Page 74 Menu item Submenu item Selections Comments Legacy ROM Legacy ROM Compatible ROM USB Configuration Enabled Enabled Enabled Console Redirection Disabled Configuration Enabled Security menu Security Security Security Notes: Enabled Disabled boldface Selections...
  • Page 75: Server Management Menu

    Security Menu item Selections Comments Set Administrator Password Set User Password TPM Support Enabled Disabled TPM State Support Enabled State Pending Operation None Enable Take Ownership Disable Take Ownership Server Management menu Server Management Server Management Server Management Note: boldface Selections...
  • Page 76 Server Management Menu item Submenu item Selections Comments System Information BMC LAN Configuration Enabled Disabled Dynamic Do Nothing Boot Options menu Boot Options Boot Options UEFI Device: Hard Disk Drive: Optical Disk Drive: Removable Device: Network Device: Boot Options Notes: Enabled Disabled boldface...
  • Page 77 Menu item Selections Comments UEFI Device Boot Option #1 Boot Option #2 Hard Disk Drive Boot Option #3 Optical Disk Drive Boot Option #4 Removable Device Boot Option #5 Network Device UEFI Boot Device Priority Hard Disk Drive Priority Optical Disk Drive Priority Removable Device Priority Network Device Priority Quiet Boot...
  • Page 78: Setting The System Date And Time

    Menu item Selections Comments Bootup Num-Lock POST Error Pause Enabled Enabled Boot Manager menu Boot Manager Boot Manager Exit menu Exit Exit Exit Exit Item Comments Save Changes and Exit Discard Changes and Exit Save Changes Discard Changes Load Default Values Save as User Default Values Load User Default Values Setting the system date and time...
  • Page 79: Using Passwords

    Using passwords Setup Utility program password type Administrator password User password Note: Password considerations Notes: Setting, changing, or deleting a password Security Set Administrator Password Set User Password Note: Set User Password...
  • Page 80: Configuring The Tpm Function

    Note: Configuring the TPM function Security TPM Support TPM Support Enabled TPM Support Enabled TPM State TPM State Enabled Selecting a startup device Note: Note: Boot Options Boot Option #1 Boot Option #5...
  • Page 81: Exiting The Setup Utility Program

    Exiting the Setup Utility program Exit ➙ Discard Changes and Exit Exit ➙ Load Default Values Exit Updating or recovering the BIOS Updating (flashing) the BIOS Notes:...
  • Page 82 Security BIOS Write Protect BIOS Write Protect Disabled Recovering from a BIOS update failure Using the ThinkServer EasyStartup program...
  • Page 83 ThinkServer EasyStartup ThinkServer EasyStartup Features of the ThinkServer EasyStartup program ThinkServer EasyStartup Starting the ThinkServer EasyStartup program User Guide ThinkServer EasyStartup...
  • Page 84 Note: ThinkServer EasyStartup Next Agree Notes: Compatibility notes User Guide Home Compatibility notes User Guide Hardware list Configure RAID Install operating system...
  • Page 85: Configuring Raid

    Download drivers ThinkServer EasyStartup Note: About Configuring RAID About RAID RAID 0...
  • Page 86: Raid For Your Server

    RAID 1 RAID 5 RAID 10 RAID 50 Note: MegaRAID SAS Software User Guide RAID for your server...
  • Page 87: Configuring Raid Using The Thinkserver Easystartup Program

    Onboard SATA software RAID configuration using the LSI Software RAID Configuration Utility program; and RAID management using the MegaRAID Storage Manager program Advanced SATA/SAS hardware RAID configuration using the WebBIOS Configuration Utility program; and RAID management using the MegaRAID Storage Manager program and the MegaCLI Configuration Utility program (requires a RAID card) Note: Note:...
  • Page 88: Configuring The Onboard Sata Software Raid

    ThinkServer EasyStartup ThinkServer EasyStartup ThinkServer EasyStartup Configuring the onboard SATA software RAID Starting the LSI Software RAID Configuration Utility program Advanced SATA Configuration ➙ SATA Mode RAID Mode LSI Software RAID Configuration Utility program interface...
  • Page 89 Management Menu Management Menu Configure Initialize Note: Objects Rebuild Check Consistency Menu item Submenu item Comments Configure Easy Configuration New Configuration View/Add Configuration Clear Configuration Select Boot Drive Initialize Objects Adapter Virtual Drive Physical Drive Rebuild Check Consistency...
  • Page 90 Creating, adding, or deleting a RAID array Note: Easy Configuration View/Add Configuration Clear Configuration Attention: New Configuration Attention: Initializing a virtual drive Notes:...
  • Page 91 Initialize Setting a hot-spare drive MegaRAID SAS Software User Guide Objects ➙ Physical Drive Make Hot Spare Rebuilding a physical drive MegaRAID SAS Software User Guide Rebuild Note:...
  • Page 92 Note: Objects ➙ Adapter ➙ Rebuild Rate Note: Running a consistency check Check Consistency Note: Objects ➙ Adapter ➙ Chk Const Rate Note:...
  • Page 93: Configuring The Advanced Sata Or Sas Hardware Raid

    Installing and using the MegaRAID Storage Manager program ThinkServer EasyStartup ThinkServer EasyStartup MegaRAID SAS Software User Guide Note: MegaRAID SAS Software User Guide Configuring the advanced SATA or SAS hardware RAID Note: ThinkServer EasyStartup ThinkServer EasyStartup Note: ThinkServer EasyStartup MegaRAID SAS Software User Guide...
  • Page 94 Configuring the Ethernet controllers Updating the firmware Using the Firmware Updater program Note: Using the Lenovo ThinkServer EasyManage program...
  • Page 97: Chapter 6. Installing, Removing, Or Replacing Hardware

    Chapter 6. Installing, removing, or replacing hardware Products Options Guidelines Precautions Download & Drivers ➙ ThinkServer...
  • Page 98 Handling static-sensitive devices Attention: Notes:...
  • Page 99 Note: System reliability guidelines Working inside the server with the power on Attention: Removing the server cover Attention:...
  • Page 100 Note: Notes: Figure 34. Sliding the server cover to the rear...
  • Page 101: Removing And Reinstalling The Front Bezel

    Figure 35. Removing the server cover Attention: Removing and reinstalling the front bezel Attention: Note:...
  • Page 102 Figure 36. Removing the front bezel...
  • Page 103: Removing And Reinstalling The Pci Card Bracket Assembly

    Figure 37. Installing the front bezel Removing and reinstalling the PCI card bracket assembly Attention:...
  • Page 104 Figure 38. Releasing the PCI card bracket assembly Figure 39. Removing the PCI card bracket assembly...
  • Page 105 Figure 40. Installing the small low-profile PCI card bracket into the main PCI card bracket Figure 41. Reinstalling the PCI card bracket assembly...
  • Page 106 Installing, removing, or replacing hardware Notes: Installing or removing a memory module Options ➙ ThinkServer Memory Products Note: Memory module installation rules...
  • Page 107 Figure 42. Memory slots on the system board Note: UDIMM DIMMA1 DIMMA2 DIMMB1 DIMMB2 Installing a memory module Attention:...
  • Page 108 Notes: Figure 43. Opening the retaining clips of the memory slots Note:...
  • Page 109 Note: Figure 44. Installing a memory module What to do next: Removing a memory module Attention: Note:...
  • Page 110: Installing Or Removing A Pci Card

    Figure 45. Removing a memory module What to do next: Installing or removing a PCI card Attention: Note: Installing a PCI card Attention: Note:...
  • Page 111 Note: Figure 46. Removing a PCI card slot bracket Note:...
  • Page 112 Note: Figure 47. Installing a PCI card What to do next: Removing a PCI card Attention: Note:...
  • Page 113: Installing Or Removing The Ethernet Card

    Note: Figure 48. Removing a PCI card What to do next: Installing or removing the Ethernet card...
  • Page 114 Installing the Ethernet card Attention: Note: Note: What to do next: Start My Computer Properties Device Manager Hardware Network adapters Update Driver...
  • Page 115: Installing Or Removing The Raid Card

    Next ThinkServer EasyStartup Note: Install the software automatically (Recommended) Next Removing the Ethernet card Attention: Note: What to do next: Installing or removing the RAID card Note:...
  • Page 116 Installing the RAID card Attention: Attention: Note: Note: What to do next: Removing the RAID card Attention: Attention:...
  • Page 117 Note: Note: Note: What to do next: Note: For the ThinkServer RAID 500 Adapter: Installing or removing the ThinkServer RAID 500 Upgrade Key for Advanced RAID...
  • Page 118 Installing the TR 500 key Attention: Note: Note: Note: Figure 49. Installing the TR 500 key on the ThinkServer RAID 500 Adapter...
  • Page 119 What to do next: MegaRAID SAS Software User Guide Removing the TR 500 Key Attention: Notes:...
  • Page 120 Note: Figure 50. Removing the TR 500 Key from the ThinkServer RAID 500 Adapter What to do next: MegaRAID SAS Software User Guide For the ThinkServer RAID 700 Adapter: Installing or removing the ThinkServer RAID 700 Battery...
  • Page 121 Attention: Installing the TR 700 Battery Attention: Note: Note:...
  • Page 122 Notes: Figure 51. Installing the TR 700 Battery onto the ThinkServer RAID 700 Adapter What to do next: Removing the TR 700 Battery Attention: Notes:...
  • Page 123 Note: Figure 52. Removing the TR 700 Battery from the ThinkServer RAID 700 Adapter What to do next: Installing or removing the ThinkServer RAID 100 upgrade key for Advanced RAID...
  • Page 124 Installing the TR 100 key Attention: Note:...
  • Page 125 Note: Figure 53. Installing the TR 100 key What to do next: Removing the TR100 key Attention: Notes:...
  • Page 126 Note: Note: Figure 54. Removing the TR 100 key What to do next:...
  • Page 127 Installing or removing the ThinkServer Management Module Premium Installing the iKVM key Attention: Note:...
  • Page 128 Note: Figure 55. Installing the iKVM key What to do next: Remote Management Module User Guide Removing the iKVM key Attention:...
  • Page 129 Notes: Figure 56. Removing the iKVM key What to do next:...
  • Page 130 Installing or removing the TPM module Installing the TPM module Attention: Note: Note:...
  • Page 131 Figure 57. Installing the TPM module What to do next: Removing the TPM module Attention: Notes:...
  • Page 132: Installing Or Removing The Intelligent Diagnostics Module

    Note: Figure 58. Removing the TPM module What to do next: Installing or removing the Intelligent Diagnostics Module...
  • Page 133 Installing the Intelligent Diagnostics Module Attention: Note: Figure 59. Installing the Intelligent Diagnostics Module...
  • Page 134 Figure 60. Cable routing What to do next: Removing the Intelligent Diagnostics Module Attention: Notes:...
  • Page 135 Figure 61. Removing the Intelligent Diagnostics Module What to do next:...
  • Page 136: Installing Or Replacing An Optical Drive

    Installing or replacing an optical drive Attention: Attention: CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: • Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation.
  • Page 137 Note: Notes: Figure 62. Removing the EMI shield for the upper optical drive bay...
  • Page 138 Figure 63. Removing the optical drive...
  • Page 139 Note: Figure 64. Installing the optical drive Figure 65. Connecting cables to the rear of the optical drive...
  • Page 140 What to do next: Installing or replacing a hot-swap hard disk drive Attention: Products Options ➙ ThinkServer Hard Drives Attention: Notes:...
  • Page 141 Figure 66. Opening the front door of the server...
  • Page 142 Figure 67. Opening the handle of the hot-swap hard disk drive or the dummy tray...
  • Page 143 Figure 68. Removing the hot-swap hard disk drive or the dummy tray Note:...
  • Page 144 Figure 69. Installing the hot-swap hard disk drive What to do next: Removing or installing a non-hot-swap hard disk drive...
  • Page 145 Products Options ➙ ThinkServer Hard Drives Removing a non-hot-swap hard disk drive Attention: Note:...
  • Page 146 Figure 70. Opening the front door of the server...
  • Page 147 Figure 71. Removing the EMI-protective panel...
  • Page 148 Figure 72. Sliding the non-hot-swap hard disk drive out of the bay Note:...
  • Page 149 Figure 73. Installing the EMI-protective panel What to do next: Installing a non-hot-swap hard disk drive Attention:...
  • Page 150 Notes: Figure 74. Opening the front door of the server...
  • Page 151 Figure 75. Removing the EMI-protective panel Note:...
  • Page 152 Note: Figure 76. Installing the non-hot-swap hard disk drive into the bracket...
  • Page 153 Figure 77. Connecting cables to the rear of the non-hot-swap hard disk drive Non-hot-swap hard disk drive Power connector System board SATA connector...
  • Page 154 Figure 78. Installing the EMI-protective panel What to do next: Replacing the hot-swap hard-disk-drive backplane Attention: Note:...
  • Page 155 Note: Figure 79. Removing the hard-disk-drive cage...
  • Page 156 Figure 80. Removing the 3.5-inch hot-swap hard-disk-drive backplane Figure 81. Removing the 2.5-inch hot-swap hard-disk-drive backplane Note: Figure 82. Installing the 3.5-inch hot-swap hard-disk-drive backplane...
  • Page 157 Figure 83. Installing the 2.5-inch hot-swap hard-disk-drive backplane Note: Figure 84. Installing the hard-disk-drive cage...
  • Page 158 What to do next: Replacing the non-hot-swap power supply assembly Attention: CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
  • Page 159 Figure 85. Releasing the non-hot-swap power supply assembly...
  • Page 160 Figure 86. Removing the non-hot-swap power supply assembly...
  • Page 161 Note: Figure 87. Installing the non-hot-swap power supply assembly What to do next: Replacing a hot-swap redundant power supply Attention:...
  • Page 162 Note: CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
  • Page 163 Note: Figure 88. Removing a hot-swap redundant power supply...
  • Page 164: Replacing The Power Distribution Board And Cage Assembly

    Note: Figure 89. Installing a hot-swap redundant power supply Replacing the power distribution board and cage assembly Attention: CAUTION: Hazardous moving parts. Keep fingers and other body parts away.
  • Page 165 CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician.
  • Page 166 Figure 90. Removing the power distribution board and cage assembly...
  • Page 167 Note: Figure 91. Installing the power distribution board and cage assembly What to do next:...
  • Page 168 Replacing the front panel board assembly Attention: Note:...
  • Page 169 Figure 92. Removing the front panel board assembly...
  • Page 170: Replacing The Front System Fan

    Figure 93. Installing the front panel board assembly What to do next: Replacing the front system fan Attention:...
  • Page 171 Note: CAUTION: Hazardous moving parts. Keep fingers and other body parts away. Note:...
  • Page 172 Figure 94. Removing the front system fan Figure 95. Installing the front system fan...
  • Page 173: Replacing The Rear System Fan

    Note: What to do next: Replacing the rear system fan Attention: CAUTION: Hazardous moving parts. Keep fingers and other body parts away. Note:...
  • Page 174 Figure 96. Removing the rear system fan...
  • Page 175: Replacing The Heat Sink And Fan Assembly

    Figure 97. Installing the rear system fan What to do next: Replacing the heat sink and fan assembly Attention:...
  • Page 176 CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: The heat sink and fan assembly might be very hot. Turn off the server and wait three to five minutes to let the server cool before removing the server cover.
  • Page 177 Note: Figure 98. Removing the screws that secure the heat sink and fan assembly Notes:...
  • Page 178: Replacing The Microprocessor

    Figure 99. Installing the screws to secure the heat sink and fan assembly Note: What to do next: Replacing the microprocessor Attention:...
  • Page 179 CAUTION: The heat sink and fan assembly and the microprocessor might be very hot. Turn off the server and wait three to five minutes to let the server cool before removing the server cover. Note: Figure 100. Lifting the handle to open the microprocessor retainer...
  • Page 180 Note: Figure 101. Removing the microprocessor Note: Note: Figure 102. Do not touch the pins...
  • Page 181 Note: Figure 103. Installing the microprocessor Figure 104. Securing the microprocessor in the socket What to do next:...
  • Page 182: Replacing The System Board Battery

    Replacing the system board battery Attention: DANGER Danger of explosion if battery is incorrectly replaced. When replacing the lithium coin cell battery, use only the same or an equivalent type that is recommended by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.
  • Page 183: Replacing The System Board

    Figure 105. Removing the system board battery Figure 106. Installing the system board battery What to do next: Replacing the system board Attention: CAUTION: Hazardous moving parts. Keep fingers and other body parts away.
  • Page 184 CAUTION: The heat sink and microprocessor might be very hot. Turn off the server and wait three to five minutes to let the server cool before removing the server cover.
  • Page 185 Figure 107. Removing the screws that secure the system board...
  • Page 186 Notes: Figure 108. Removing the microprocessor socket cover...
  • Page 187 Notes: Figure 109. Installing the microprocessor socket cover Figure 110. Seating the microprocessor socket cover in the socket...
  • Page 188 Figure 111. Securing the microprocessor socket cover Figure 112. Installing the screws to secure the system board...
  • Page 189 What to do next: Note: Completing the parts replacement Reinstalling the server cover and reconnecting cables Attention: Attention: Note:...
  • Page 190 Figure 113. Closing the server cover Figure 114. Installing the server cover...
  • Page 191: Updating The Server Configuration

    Note: Attention: Note: Updating the server configuration Download & Drivers ➙ ThinkServer...
  • Page 193: Chapter 7. Troubleshooting And Diagnostics

    Chapter 7. Troubleshooting and diagnostics Troubleshooting procedure Viewing the status and diagnostic LEDs...
  • Page 194 Using a diagnostic program Continue Accept Viewing the system event log Remote Management Module User Guide Basic troubleshooting tables ThinkServer EasyStartup program problems Note:...
  • Page 195: Optical Drive Problems

    Symptom Action ThinkServer EasyStartup ThinkServer EasyStartup Optical drive problems Notes: Symptom Action...
  • Page 196 Symptom Action Hard-disk-drive problems Notes: Symptom Action...
  • Page 197: Memory Module Problems

    Symptom Action Memory module problems Notes:...
  • Page 198 Symptom Action Keyboard, mouse, or USB device problems Symptom Action...
  • Page 199: Post Error Codes

    Symptom Action POST error codes Note:...
  • Page 201: Chapter 8. Fru Lists

    Chapter 8. FRU lists Attention: Note: Figure 115. Component locations Major FRUs...
  • Page 202 Item number...
  • Page 203 Item number...
  • Page 204 Item number...
  • Page 205 Item number...
  • Page 206 Item number...
  • Page 207 Item number...
  • Page 208 Item number...
  • Page 209 Item number...
  • Page 210 Item number...
  • Page 211 Item number...
  • Page 212 Item number...
  • Page 213 Item number...
  • Page 214 Item number...
  • Page 215: Mechanical Frus

    Item number Mechanical FRUs FRU number...
  • Page 216 FRU number...
  • Page 217 FRU number...
  • Page 218 FRU number...
  • Page 219 FRU number...
  • Page 220: Adapters And Miscellaneous Frus

    FRU number Adapters and miscellaneous FRUs FRU number...
  • Page 221 FRU number...
  • Page 222: Power Cords

    FRU number Power cords...
  • Page 223 Primary power cord number...
  • Page 224 Primary power cord number...
  • Page 225 Primary power cord number...
  • Page 226 Primary power cord number...
  • Page 227 Secondary power cord number...
  • Page 228 Secondary power cord number...
  • Page 229 Secondary power cord number...
  • Page 230 Secondary power cord number Shipgroup...
  • Page 231 Shipgroup FRU number...
  • Page 232 Shipgroup FRU number...
  • Page 233 Shipgroup FRU number...
  • Page 234 Shipgroup FRU number...
  • Page 235 Shipgroup FRU number...
  • Page 236 Shipgroup FRU number...
  • Page 237 Shipgroup FRU number...
  • Page 238 Shipgroup FRU number...
  • Page 239: Chapter 9. Getting Information, Help, And Service

    Chapter 9. Getting information, help, and service Information resources Using the documentation Hardware Maintenance Manual ThinkServer Web site Lenovo Support Web site...
  • Page 240: Help And Service

    Help and service Before you call Calling for service Problem determination Hardware repair Engineering Change management...
  • Page 241 Warranty and Support Information Using other services Warranty Purchasing additional services...
  • Page 243: Appendix A. Notices

    Appendix A. Notices Lenovo (United States), Inc. 1009 Think Place - Building One Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing...
  • Page 244 Trademarks Important notes Polyvinyl Chloride (PVC) cable and cord notice WARNING: Wash hands after handling Recycling information...
  • Page 245: Battery Return Program

    Battery return program Battery recycling information for the United States and Canada Battery recycling information for the European Union Notice:...
  • Page 246: Requirement For Batteries Containing Perchlorate

    Requirement for batteries containing perchlorate Particulate contamination Attention: Table 1. Limits for particulates and gases Contaminant Limits Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size Environmental conditions for process measurement and control systems: Airborne contaminants...
  • Page 247 Important WEEE information...
  • Page 248 Restriction of Hazardous Substances Directive (RoHS) Turkish RoHS German Ordinance for Work gloss statement Export classification notice Electronic emission notices User Guide...
  • Page 249: Appendix B. İthalatçı - İmalatçı / Üretici Firma Bilgileri Ve Diğer Bilgiler

    Appendix B. İthalatçı – İmalatçı / Üretici Firma Bilgileri ve Diğer Bilgiler İmalatçı ya da ithalatçı firmaya ilişkin bilgiler: Bakım, onarım ve kullanımda uyulması gereken kurallar: Taşıma ve nakliye sırasında dikkat edilecek hususlar: Aygıta ilişkin bakım, onarım ya da temizliğe ilişkin bilgiler: Kullanım sırasında insan ya da çevre sağlığına zararlı...
  • Page 250 Bağlantı ve montaja ilişkin bilgiler: Bakanlıkça tespit ve ilan edilen kullanım ömrü: Enerji tüketen mallarda, malın enerji tüketimi açısından verimli kullanımına ilişkin bilgiler: Servis istasyonlarına ilişkin bilgiler: İthal edilmiş mallarda, yurt dışındaki üretici firmanın unvanı ve açık adresi ile diğer erişim bilgileri (telefon, telefaks ve e-posta vb.):...
  • Page 251: Appendix C. Servis İstasyonları Ve Yedek Parça Malzemelerinin Temin Edileceği Adresler

    Appendix C. Servis İstasyonları ve Yedek Parça Malzemelerinin Temin Edileceği Adresler Garanti Hizmetinin Alınabileceği Merkezler ANKARA Bdh Bilişim Destek Hiz. San. Ve Tic. A.Ş. Destek Bilgisayar Ve İletişim Hiz. Tic. A.Ş. BURSA Bdh Bilişim Destek Hizmetleri San.Ve Tic. Netpro Bilgisayar Büro Makinaları Elektronik Sanayi Ve Özel Eğitim Hizmetleri Ticaret Ltd.Şti. DENİZLİ...
  • Page 252 DİYARBAKIR Metro Bilgisayar Eğitim Tic. ve San.Ltd. Şti. İSTANBUL Bdh Bilişim Destek Hizmetleri San.Ve Tic.Aş. Bilgi Birikim Sistemleri Elktr. ve Bilg. D Yedi Yirmidört Bilişim Hizmetleri Ticaret A.S. İntegra Profesyonel Hiz. Ltd. Şti. İntercomp Bilgisayar Sanayi Ve Hizmetleri Ltd. Şti. Netservis Bilgisayar Sistemleri San.
  • Page 253 Peritus Bilgisayar Sist. Dış Tic.San.Ltd.Şti. Seri Bilgi Teknolojileri LTD ŞTI. İZMİR Adapa Bilgi Sistemleri Tur.San. Ve Tic.A.Ş. Bdh Bilişim Destek Hizmetleri San.Ve Tic. A.Ş. Ege Bimtes Bilgi İşlem Mak.Ser.San.Ve Tic.Ltd.Şti MALATYA Bdh Bilişim Destek Hizmetleri Sanayi Ve Ticaret A.Ş. SAMSUN Bdh Bilişim Destek Hizmetleri San.Ve Tic.A.Ş.
  • Page 254 ŞANLIURFA Bdh Bilişim Destek Hizmetleri San.Ve Tic. Bilban Bilgisayar Eğitim Tic. San. Ltd. Şti.
  • Page 255: Index

    Index...

Comments to this Manuals

Symbols: 0
Latest comments: