Figure 19. Front view
Figure 20. Rear view
1
-
8
Slot 0–slot 7
Used to connect 2.5-inch drives.
9
Mini-SAS signal cable connector 1
Used to connect the mini-SAS connector on the RAID card. You also can use a SATA to mini-SAS signal
cable to connect the backplane to the SATA connectors on the system board.
10
8-pin power connector
Used to connect the power connector on the power distribution board, power conversion board, or system
board.
11
Mini-SAS signal cable connector 0
Used to connect the mini-SAS connector on the RAID card. You also can use a SATA to mini-SAS signal
cable to connect the backplane to the SATA connectors on the system board.
System board components
The following illustration shows the component locations on the system board.
28
ThinkServer TS450 User Guide and Hardware Maintenance Manual