Lenovo ThinkServer TS430 Hardware Maintenance Manual page 50

Backplane for 2.5-inch hot-swap hard disk drives
This topic provides information to help you locate the connectors on the 2.5-inch hot-swap hard-disk-drive
backplane.
The following illustrations show the connectors on the 2.5-inch hot-swap hard-disk-drive backplane.
Figure 22. Front view of the 2.5-inch hot-swap hard-disk-drive backplane
1
Slot 0 for a 2.5-inch SAS hot-swap hard disk
drive
2
Slot 1 for a 2.5-inch SAS hot-swap hard disk
drive
3
Slot 2 for a 2.5-inch SAS hot-swap hard disk
drive
4
Slot 3 for a 2.5-inch SAS hot-swap hard disk
drive
Figure 23. Rear view of the 2.5-inch hot-swap hard-disk-drive backplane
1
8-pin power connector
Used to connect the P5 power connector of the power supply.
38
ThinkServer TS430 Hardware Maintenance Manual
5
Slot 4 for a 2.5-inch SAS hot-swap hard disk drive
6
Slot 5 for a 2.5-inch SAS hot-swap hard disk drive
7
Slot 6 for a 2.5-inch SAS hot-swap hard disk drive
8
Slot 7 for a 2.5-inch SAS hot-swap hard disk drive