Configuring The Destination For Appletalk Networks - Canon imagePROGRAF iPF6300S User Manual

Network Setting

Configuring the Destination for AppleTalk Networks

To print over an AppleTalk network, activate the AppleTalk protocol and configure the destination as follows.
Activating AppleTalk on the printer
Important
• By default, the AppleTalk protocol is disabled on the printer.
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
2.
Press the OK button.
The Set./Adj. Menu is displayed.
3.
Press ▲ or ▼ to select Interface Setup, and then press the OK button.
4.
Press ▲ or ▼ to select AppleTalk, and then press the OK button.
10
5.
Press ▲ or ▼ to select On, and then press the OK button.
6.
Press the Menu button.
If you have changed any settings, a confirmation message is displayed. In this case, press the OK button.
Important
964
• Be sure to complete step 6. This will activate the values you have entered.
Note
• By using RemoteUI, you can also specify the object name used for AppleTalk, as well as the printer zone
name.
For details on RemoteUI, see "Using RemoteUI ."
Configuring the Destination for AppleTalk Networks
> Mac OS X Settings >
Note
• If the Tab Selection screen is not displayed, press the Menu button.
→P.938
).
iPF6300S